Here are lists of compatible bowls and accessories (beater/dough hook/whip), grouped by model type. Model number designations refer to the label underneath the base of the mixer. These lists are formatted as tables; the left column is the item number, which you can use for a web search.
- K45-type Tilt-heads
- K5-type Bowl-lift
- “Professional HD” Bowl-lift
- “New Generation” Bowl-lift
- Accolade 400
- Artisan Mini (KSM33xx)
Where to buy: most items with retail part numbers (beginning with “K” or a number) can be found by searching on KitchenAid’s web site. Other good places to look are Seneca River Trading and Goodman’s. You can also search using the service part number (beginning with a “W”), when one is provided. Some items can also be found on Amazon, but be careful — there are many knockoffs which are inferior in quality or fitment.
K45-type Tilt Heads
This list is for any tilt-head model which has a round rear cover secured by a screw at the top. This includes the original K45, K45SS, KSM90, KSM150, and many many others. If your mixer’s model number begins with “4” or “5”, disregard the first letter when determining the model number. Thus “5KSM150” is just “KSM150”.
| K45B | Flat beater |
| K45DH | Dough hook, white |
| K45BDH | Dough hook, “subtle silver” |
| K45WW | Wire whip (zinc/aluminum hub, not dishwasher safe) |
| K5THCB | Flat beater, 4.5/5qt, white (interchanges with K45B) |
| K5THBS | Flat beater, 4.5/5qt, “subtle silver” (interchanges with K45B) |
| KSM5THFBSS | Flat beater, 4.5/5qt, stainless steel (interchanges with K45B) |
| KSMTHFBSS | Flat beater, 4.5/5qt, stainless steel, 2026 release (interchanges with K45B) |
| KSM5THDHSS | Dough hook, 4.5/5qt, stainless steel (interchanges with K45DH) |
| KSMTHDHSS | Dough hook, 4.5/5qt, stainless steel, 2026 release (interchanges with K45DH) |
| KSM5THWWSS | Wire whip, 4.5/5qt, stainless steel hub (dishwasher safe, interchanges with K45WW) |
| KSMTHWWSS | Wire whip, 4.5/5qt, stainless steel, 2026 release (dishwasher safe, interchanges with K45WW) |
| KFE5T | Flex edge flat beater, white |
| KFE5TS | Flex edge flat beater, “subtle silver” |
| KSMTHSFSS | Flex edge flat beater, stainless steel, 2026 release |
| KSMPBW | Pastry beater, white coated |
| KSMPB5 | Pastry beater, silver coated |
| KSMPB5SS | Pastry beater, stainless steel |
| KSMTHPBSS | Pastry beater, stainless steel, 2026 release |
| KSM5TH3PSS | Three-piece stainless-steel accessory set (includes KSM5THFBSS, KSM5THDHSS, KSM5THWWSS) |
| KSMTH3PSS | Three-piece stainless-steel accessory set (2026 release, includes KSMTHFBSS, KSMTHDHSS, KSMTHWWSS) |
| KB3SS | Bowl, 3qt stainless, no handle |
| K45SBWH | Bowl, 4.5qt stainless, flat handle |
| K5THSBP | Bowl, 5qt stainless, comfort handle |
| KSM5GB | Bowl, 5qt glass (supersedes K5GB) |
| KSM5GBF | Bowl, 5qt frosted glass (discontinued; no longer available) |
| WPW10220977 | Replacement thread ring for glass twist-base bowl (KSM5GB/KSM5GBF) |
| KN1PS | Pour shield (use service part number WPW10616906) |
| KSMTHPS | Pour shield (current version; may not fit some older bowls) |
| KICA0WH | Ice cream maker (discontinued version) |
| KSMICM | Ice cream maker (current version) |
| KSMHAP | Attachment hub cover and thumbscrew kit |
| 9709194G | Attachment hub thumbscrew, black (search for this number on KitchenAid’s web site) |
| 9709707G | Replacement foot (search for this part number on KitchenAid’s web site; sold singly) |
| KA-86012-5PK | Replacement foot, set of 5 (aftermarket, via Goodman’s) |
All of these items are dishwasher safe, except for the K45WW wire whip. Hand washing will prolong the service life of the coated beaters and dough hooks.
Warning: do not use a spiral dough hook with any tilt-head model. Spiral hooks apply enormous upward force under heavy load, and the mixer’s hinge and tilt lock are not designed for these loads.
Where to buy: most items with retail part numbers (beginning with “K” or a number) can be found by searching on KitchenAid’s web site. Other good places to look are Seneca River Trading and Goodman’s. You can also search using the service part number (beginning with a “W”), when one is provided. Some items can also be found on Amazon, but be careful — there are many knockoffs which are inferior in quality or fitment.
Care Tips for Tilt-Head Mixers
K5-Type Bowl-lift
This list is for bowl-lift models which have a round rear cover secured by a screw at the top. This includes the original vintage K5-A, K5SS, KSM5, KSM50, KP50, KPM50, KSM450, KSM500, K4SS, and KSMC50S. (If your mixer’s model number begins with “4” or “5”, disregard the first letter when determining the model number. Thus “4KSM450” is just “KSM450”.)
| K5AB | Flat Beater |
| K5ADH | Dough hook, C-shaped |
| K5AWW | Wire whisk (not dishwasher safe) |
| K5ASBP | Bowl, 5qt, polished |
| K5ASB | Bowl, 5qt, brushed |
| KICA0WH | Ice cream maker (discontinued version, but may still be available from some sources) |
| KSMHAP | Attachment hub cover and thumbscrew kit |
| KN1PS | Pour shield (use service part number WPW10616906) |
| KSMTHPS | Pour shield (updated; may not fit some bowls) |
| WP4162038 | Replacement foot (sold singly) |
| UV-86321 | Replacement foot (aftermarket, set of 4, via Goodman’s) |
| 9709194G | Attachment hub thumbscrew, black (search for this number on KitchenAid’s web site) |
All of these items are dishwasher safe, except for the K5AWW wire whip. Hand washing will prolong the service life of the coated beaters and dough hooks.
Note: KitchenAid never made stainless-steel accessories for this model. There is an aftermarket stainless flat beater from Superdoughhook which I have not tried. It is designated the “JP25A” and is available in their web store and via Etsy.
Where to buy: most items with retail part numbers (beginning with “K” or a number) can be found by searching on KitchenAid’s web site. Other good places to look are Seneca River Trading and Goodman’s. You can also search using the service part number (beginning with a “W”), when one is provided. Some items can also be found on Amazon, but be careful — there are many knockoffs which are inferior in quality or fitment.
Care Tips for Bowl-Lift Mixers
“Professional HD” (KG25/KM25) and “Professional 6000HD” (KSM6573)
This list is for the “Professional HD” and its contemporary “Commercial” branded variant. This includes the KG25 and KM25 models only. (If your mixer’s model number begins with “4” or “5”, disregard the first letter when determining the model number. Thus “4KG25” is just “KG25”.)
The “Professional 6000HD” shares a bowl cradle with the KG25/KM25 model type, and due to the unique design of the “tulip” bowl, uses specific accessories which are no longer available. Service part number W11350316 is a kit which includes a bowl, flat beater, and dough hook to replace the “tulip” bowl and its unique F-type accessories.
| K5AB | Flat Beater, KG25/KM25 |
| K5ADH | Dough hook, C-shaped, KG25/KM25 |
| KNS25DHNSF | Dough hook, spiral, KG25H/KM25 |
| K5AWW | Wire whisk, KG25/KM25 (not dishwasher safe) |
| KN25PBH | Bowl, 5qt, polished, KG25/KM25 (service part number WPW10716820) |
| KN25NSF | Bowl, 5qt, NSF, KG25/KM25 |
| W11350316 | Kit includes KN25PBH, K5AB, KNS25DHNSF |
| KN1PS | Pour shield (use service part number WPW10616906) |
| KSMTHPS | Pour shield (updated; may not fit some bowls) |
| 9708649G | Replacement foot (search for this number on KitchenAid’s web site; sold singly) |
| KA-86001-5PK | Replacement foot (aftermarket, set of 5, via Goodman’s) |
| 9709194G | Attachment hub thumbscrew, black (search for this number on KitchenAid’s web site) |
Caution: frequent and prolonged use of the spiral dough hook for kneading can eventually cause the beater shaft bearing to migrate up into the planetary over time. When this happens, the top of the beater shaft will start grinding against the underside of the lower housing and cause damage. Visually inspect the beater shaft bearing on the bottom of the planetary before each use, and if it has receded into the planetary, discontinue use of the mixer until you have replaced the planetary.
Where to buy: most items with retail part numbers (beginning with “K” or a number) can be found by searching on KitchenAid’s web site. Other good places to look are Seneca River Trading and Goodman’s. You can also search using the service part number (beginning with a “W”), when one is provided. Some items can also be found on Amazon, but be careful — there are many knockoffs which are inferior in quality or fitment.
Care Tips for Bowl-Lift Mixers
“New Generation” Bowl-lift
Where to buy: most items with retail part numbers (beginning with “K” or a number) can be found by searching on KitchenAid’s web site. Other good places to look are Seneca River Trading and Goodman’s. You can also search using the service part number, when one is provided. Some items can also be found on Amazon, but be careful — there are many knockoffs which are inferior in quality or fitment.
| KN3CW | 3qt bowl & “combi whip” set |
| KN25WPBH | 5qt bowl |
| KSMC5QBOWL | 5qt NSF bowl |
| KSMB55 | 5.5qt bowl |
| KN2B6PEH | 6 Qt. Bowl w/ Ergo.Handle (Polished) |
| KSMB60 | 6qt bowl (stainless, newer version) |
| KA7QBOWL | 7qt bowl (KSM55/KSM60/KSM60/KSM65xx/KSM7xxx/KSM8xxx) |
| KSMB70 | 7qt bowl (stainless, new version, KSM55/KSM60/KSM60/KSM65xx/KSM7xxx/KSM8xxx) |
| KSMC8QBOWL | 8qt NSF bowl (KSM7xxx and newer) |
| Sertodo Copper Bowl | 6qt copper bowl |
| KN256CBT | Flat Beater — Coated, 5/6qt |
| KFEW6L | Flat beater — flex edge, 5/6qt |
| KDF7B | Flat beater — double flex edge |
| KA7QCFB | Flat Beater — Coated, 7/8qt |
| KNS256CDH | Spiral Dough Hook — Coated |
| KSMC7QDH | Spiral Dough Hook — Stainless |
| KN256CDH | “C” Dough Hook — Coated |
| KN256WW | Wire Whip (not dishwasher safe) |
| KN211WW | Pro 11 Wire Whip (dishwasher safe, interchanges with KN256WW) |
| KSM7QEW | Pro 11 Wire Whip (dishwasher safe, exchangeable with KN211WW) |
| KSMBLPS | Pouring Shield (Secure Fit) |
| KSMPB7SS | Pastry beater, stainless steel |
| KSMC7QFB | Flat beater — Stainless |
| KSM7BL3PSS | Three-piece stainless steel accessory set (includes KN211WW, KSMC7QFB, KSMC7QDH) |
| KSMICM | Ice cream maker |
| 9708649G | Replacement foot (search for this number on KitchenAid’s web site; sold singly) |
| A-86001-5PK | Replacement foot (aftermarket, set of 5, via Goodman’s) |
| 9709194G | Attachment hub thumbscrew, black (search for this number on KitchenAid’s web site) |
All of these items are dishwasher safe, except for the KN256WW wire whip. Hand washing will prolong the service life of the coated beaters and dough hooks.
Caution: frequent and prolonged use of the spiral dough hook for kneading can eventually cause the beater shaft bearing to migrate up into the planetary over time. When this happens, the top of the beater shaft will start grinding against the underside of the lower housing and cause damage. Visually inspect the beater shaft bearing on the bottom of the planetary before each use, and if it has receded into the planetary, discontinue use of the mixer until you have replaced the planetary.
Where to buy: most items with retail part numbers (beginning with “K” or a number) can be found by searching on KitchenAid’s web site. Other good places to look are Seneca River Trading and Goodman’s. You can also search using the service part number (beginning with a “W”), when one is provided. Some items can also be found on Amazon, but be careful — there are many knockoffs which are inferior in quality or fitment.
The Sertodo copper mixing bowl is available directly from the manufacturer.
Care Tips for Bowl-Lift Mixers
Accolade 400
This list is for the Accolade 400 (model numbers beginning with “KN15”). If your mixer’s model number begins with “4” or “5”, disregard the first letter when determining the model number.
| K45B | Flat beater |
| K45DH | Dough hook |
| K45WW | Wire whip (zinc/aluminum hub, not dishwasher safe) |
| K5THCB | Flat beater, 5qt, white (interchanges with K45B) |
| K5THBS | Flat beater, 5qt, “subtle silver” (interchanges with K45B) |
| KSM5THFBSS | Flat beater, 5qt, stainless steel (interchanges with K45B) |
| KSM5THDHSS | Dough hook, 5qt, stainless steel (interchanges with K45DH) |
| KSM5THWWSS | Wire whip, 5qt, stainless steel hub (dishwasher safe, interchanges with K45WW) |
| KFE5T | Flex edge flat beater, white |
| KFE5TS | Flex edge flat beater, “subtle silver” |
| KSMPBW | Pastry beater, white coated |
| KSMPB5 | Pastry beater, silver coated |
| KSMPB5SS | Pastry beater, stainless steel |
| KSM5TH3PSS | Three-piece stainless-steel attachment set (includes KSM5THFBSS, KSM5THDHSS, KSM5THWWSS) |
| KN13PB | Bowl, 3qt stainless, Accolade 400 only (discontinued; no longer available) |
| KN15PBEH | Bowl, 5qt stainless, Accolade 400 only (discontinued; no longer available) |
| KN1PS | Pour shield (use service part number WPW10616906) |
| KSMTHPS | Pour shield (current version; may not fit some older bowls) |
| KICA0WH | Ice cream maker (discontinued version; adapter required for Accolade 400, service part number 9707760) |
| KSMHAP | Attachment hub cover and thumbscrew kit (cover not used on Accolade 400) |
| 9709194G | Attachment hub thumbscrew, black (search for this number on KitchenAid’s web site) |
| 9709707G | Replacement foot (search for this part number on KitchenAid’s web site; sold singly) |
| KA-86012-5PK | Replacement foot (aftermarket, set of 5, via Goodman’s) |
All of these items are dishwasher safe, except for the K45WW wire whip. Hand washing will prolong the service life of the coated beaters and dough hooks.
Warning: do not use a spiral dough hook with any tilt-head model. Spiral hooks apply enormous upward force under heavy load, and the mixer’s hinge and tilt lock are not designed for these loads.
Where to buy: most items with retail part numbers (beginning with “K” or a number) can be found by searching on KitchenAid’s web site. Other good places to look are Seneca River Trading and Goodman’s. You can also search using the service part number (beginning with a “W”), when one is provided. Some items can also be found on Amazon, but be careful — there are many knockoffs which are inferior in quality or fitment.
Care Tips for Tilt-Head Mixers
Artisan Mini
This list is for the Artisan Mini, model numbers beginning with “KSM33”.
| KSM35CFB | Flat beater |
| KSM35CDH | Dough hook |
| KSM35WW | Wire whip (zinc/aluminum hub, not dishwasher safe) |
| KFE35T | Flex Edge flat beater |
| KSM35SSFP | Bowl, 3.5qt stainless, polished, with handle |
| KSM35SSB | Bowl, 3.5qt stainless, polished, no handle |
| KSM35GB | Bowl, 3.5qt glass |
Care Tips for Tilt-Head Mixers
Where to buy: most items with retail part numbers (beginning with “K” or a number) can be found by searching on KitchenAid’s web site. Other good places to look are Seneca River Trading and Goodman’s. You can also search using the service part number (beginning with a “W”), when one is provided. Some items can also be found on Amazon, but be careful — there are many knockoffs which are inferior in quality or fitment.